Older version 8Fun disassembled
- stinoo72
- May 1, 2023
- 1 min read
This is an older version of the BB 8FUN
Steel gear teeth are very badly worn down
Needle bearings in main shaft body housing are in poor condition and don't spin freely enough.
Needle bearings in Nylon gear also are very rough.
Motor windings and static in good condition.
Clutch and steel gear internal teeth in good condition
When motor was disassembled grease had hardened
And motor was full of fine grit made up of metal shavings and grease.
A earlier service would have prevented this from
Happening.
